View all ArmorStart Distributed Motor Controllers
280D-F12S-10B-CR
ArmorStart Direct Online Starter
Rockwell Automation announces that as of October 08, 2024, the ArmorStart Direct Online Starter will be discontinued and no longer available for sale. Customers are encouraged to remove references to the affected product(s)
停产日期:
October 08, 2024
替代类别:
Engineering Replacement
Rockwell Automation announces that as of October 08, 2024, the ArmorStart Direct Online Starter will be discontinued and no longer available for sale. Customers are encouraged to remove references to the affected product(s)
停产日期:
October 08, 2024
替代类别:
Engineering Replacement
| Communications |
DeviceNet
|
|---|---|
| Sub Brand |
ArmorStart
|
| Degree of protection (IP) |
IP67
|
|---|---|
| Shipping weight, approx |
6.8 kg
|
| Shock |
Opsal: 15 G
|
| Wire strip length |
Power and ground terminals: 0.35 in (9 mm)
|
| Vibration |
Opsal, 1 G, 0.15 mm (0.006 in) displacement
|
| Tightening torque |
Power and ground terminals: 4.5 in-lb per UL/NEMA (sary terminal)
|
| Contactor size |
12 A
|
|---|---|
| Overload current, min |
0.5 A
|
| Communication |
DeviceNet
|
| Short circuit protection |
10 A rated device
|
| DeviceNet input current surge |
15 A for 250 µs
|
| DeviceNet input current |
364mA @ 11V DC - 4.0 W
|
| Total w/max. sensor inputs (4) |
367mA @ 24V DC - 8.0 W
|
| Safety |
Hardwired Safety (STO)
|
| Overvoltage category |
Control circuit: III per IEC
|
| Rated operational current |
Power circuit: 2.5 A maximum
|
| Product type |
Full voltage starter
|
| Rated impulse voltage |
Power circuit: 4 kV
|
| DeviceNet supply voltage rating |
Range 11...25V DC @ 24V DC Nominal
|
| Baud rates |
DeviceNet communications: 500 kbps
|
| Control voltage |
Power requirements: 24V DC without HOA
|
| Contactor current (pick up) |
Power requirements: 1.09 A without HOA
|
| Contactor current (hold in) |
Power requirements: 0.30 A without HOA
|
| Rated input operation voltage |
24V DC
|
| Input OFF-state current |
<1.5 mA
|
| Input OFF-state voltage |
0…5V DC
|
| Input ON-state voltage |
10...26V DC
|
| Distance, max |
DeviceNet communications: 500 m (1630 ft) @ 125 kbps
|
| Operating frequency |
Power circuit: 50/60 Hz
|
| Input ON-state current |
7.2mA @ 24V DC
|
| Number of contacts |
Output rating- sourced from control circuit: 2
|
| Voltage status only |
Sensor source: 11...25V DC from DeviceNet
|
| Trip rating |
120% of full load current (FLC) setting
|
| Total control power (pick up), max |
External devices powered by control voltage: 73 W with HOA
|
| Total control power (hold in), max |
External devices powered by control voltage: 58 W with HOA
|
| Input compatibility |
IEC 1+
|
| Application in industrial area permitted (SCPD list) |
Size per NFPA 70 (NEC) or NFPA 79 for group motor applications
|
| Rated output operation voltage |
Sourced from control circuit: 240V AC / 30V DC
|
| Insulation voltage |
Power circuit: rated 600V
|
| Dielectric withstand |
Power circuit: 2500V AC per IEC
|
| Type of contacts |
Output rating- sourced from control circuit: normally open (NO)
|
| Outputs current (2) 1 A each, max |
External devices powered by control voltage: 2 A without HOA
|
| Current available |
Sensor source: 50 mA maximum per input, 200 mA total
|
| Type of control circuit |
Output rating- sourced from control circuit: electromechanical relay
|
| Conventional thermal current (Ith) |
Output rating- sourced from control circuit: total of both outputs ≤2 A
|
| RMS symmetrical amperes |
65 kA @ 480Y/277V
|
| Rated operation voltage |
Power circuit: 380Y/220...480Y/277V AC
|
| 3-phase power/motor cable connection |
Conduit entrance with motor cable
|
| Input filter - software selectable |
Settable from 0...64 ms in 1 ms increments (ON to OFF)
|
| Kind of current |
Output ratings (sourced from control circuit): AC/DC (not to be used as an AC/DC power supply)
|
| Total control power (pick up) |
Power requirements: 26.0 W without HOA
|
| Total control power (hold in) |
Power requirements: 7.2 W without HOA
|
| Trip class |
Class 10, 15, 20
|
| Operational power rating |
Full voltage starters - IP67/Type 4/12: 1Hp @ 460V AC, 60 Hz
|
| Number of digital inputs |
4
|
| Number of digital outputs |
2
|
| Supporting protocol for DeviceNet |
Yes
|
| Application in industrial area permitted |
Yes
|
| Supporting protocol for DeviceNet Safety |
Yes
|
| Mains frequency |
50/60 Hz
|
| Short circuit protection device performance (SCPD) type |
Type 1
|
| Short circuit rating |
30 kA
|
| Disconnect |
Motor disconnect
|
| Conection type |
Quick disconnects
|
| Utilization category |
Power circuit: AC-3 per IEC
|
| External devices powered by DeviceNet |
50 mA - total 200 mA
|
| Backplane current load |
Output rating- sourced from control circuit: 400 mA
|
| Altitude |
2000 m
|
|---|---|
| Operating temperature |
-20 °C
|
| Storage and transportation temperature |
-25 °C
|
| Humidity |
5…95% (noncondensing)
|
| Protection against shock |
Power circuit: IP2X per IEC
|
| Surge transient |
1 kV L-L, 2 kV L-N (earth)
|
| Radiated emissions |
Class A, group 1, equivalent to C2 emissions
|
| Conducted radio frequency emissions |
Class A
|
| Radio frequency electromagnetic field |
10 V/m
|
| Degree of protection (NEMA) |
4
|
| Pollution degree |
3
|
| Fast transient |
2 kV
|
| Electrostatic discharge |
4 kV contact and 8 kV air
|
| Height, approx |
287.5 mm
|
|---|---|
| Depth, approx |
Motor connection 243 mm (9.57 in) M35 cordset
|
| Wire size |
Power and ground terminal: 1.5...5.3 mm² per IEC (primary terminal)
|
| Width, approx |
351 mm
|
| Number of poles |
3
|
| 基本信息 | 出版 |
|---|---|
| User Manual | 280ES-UM002 |
| Product Cutsheet | -- |
| Product Profile | 280ES-PC001 |
| Selection Guide | 280-SG002 |
| Technical Data | 280ES-TD001 |
| 用户手册 | 出版 |
|---|---|
| 280-um004_-en-p | 280-UM004 |
| 技术说明 |
|---|
技术规格
| Communications |
DeviceNet
|
|---|---|
| Sub Brand |
ArmorStart
|
| Degree of protection (IP) |
IP67
|
|---|---|
| Shipping weight, approx |
6.8 kg
|
| Shock |
Opsal: 15 G
|
| Wire strip length |
Power and ground terminals: 0.35 in (9 mm)
|
| Vibration |
Opsal, 1 G, 0.15 mm (0.006 in) displacement
|
| Tightening torque |
Power and ground terminals: 4.5 in-lb per UL/NEMA (sary terminal)
|
| Contactor size |
12 A
|
|---|---|
| Overload current, min |
0.5 A
|
| Communication |
DeviceNet
|
| Short circuit protection |
10 A rated device
|
| DeviceNet input current surge |
15 A for 250 µs
|
| DeviceNet input current |
364mA @ 11V DC - 4.0 W
|
| Total w/max. sensor inputs (4) |
367mA @ 24V DC - 8.0 W
|
| Safety |
Hardwired Safety (STO)
|
| Overvoltage category |
Control circuit: III per IEC
|
| Rated operational current |
Power circuit: 2.5 A maximum
|
| Product type |
Full voltage starter
|
| Rated impulse voltage |
Power circuit: 4 kV
|
| DeviceNet supply voltage rating |
Range 11...25V DC @ 24V DC Nominal
|
| Baud rates |
DeviceNet communications: 500 kbps
|
| Control voltage |
Power requirements: 24V DC without HOA
|
| Contactor current (pick up) |
Power requirements: 1.09 A without HOA
|
| Contactor current (hold in) |
Power requirements: 0.30 A without HOA
|
| Rated input operation voltage |
24V DC
|
| Input OFF-state current |
<1.5 mA
|
| Input OFF-state voltage |
0…5V DC
|
| Input ON-state voltage |
10...26V DC
|
| Distance, max |
DeviceNet communications: 500 m (1630 ft) @ 125 kbps
|
| Operating frequency |
Power circuit: 50/60 Hz
|
| Input ON-state current |
7.2mA @ 24V DC
|
| Number of contacts |
Output rating- sourced from control circuit: 2
|
| Voltage status only |
Sensor source: 11...25V DC from DeviceNet
|
| Trip rating |
120% of full load current (FLC) setting
|
| Total control power (pick up), max |
External devices powered by control voltage: 73 W with HOA
|
| Total control power (hold in), max |
External devices powered by control voltage: 58 W with HOA
|
| Input compatibility |
IEC 1+
|
| Application in industrial area permitted (SCPD list) |
Size per NFPA 70 (NEC) or NFPA 79 for group motor applications
|
| Rated output operation voltage |
Sourced from control circuit: 240V AC / 30V DC
|
| Insulation voltage |
Power circuit: rated 600V
|
| Dielectric withstand |
Power circuit: 2500V AC per IEC
|
| Type of contacts |
Output rating- sourced from control circuit: normally open (NO)
|
| Outputs current (2) 1 A each, max |
External devices powered by control voltage: 2 A without HOA
|
| Current available |
Sensor source: 50 mA maximum per input, 200 mA total
|
| Type of control circuit |
Output rating- sourced from control circuit: electromechanical relay
|
| Conventional thermal current (Ith) |
Output rating- sourced from control circuit: total of both outputs ≤2 A
|
| RMS symmetrical amperes |
65 kA @ 480Y/277V
|
| Rated operation voltage |
Power circuit: 380Y/220...480Y/277V AC
|
| 3-phase power/motor cable connection |
Conduit entrance with motor cable
|
| Input filter - software selectable |
Settable from 0...64 ms in 1 ms increments (ON to OFF)
|
| Kind of current |
Output ratings (sourced from control circuit): AC/DC (not to be used as an AC/DC power supply)
|
| Total control power (pick up) |
Power requirements: 26.0 W without HOA
|
| Total control power (hold in) |
Power requirements: 7.2 W without HOA
|
| Trip class |
Class 10, 15, 20
|
| Operational power rating |
Full voltage starters - IP67/Type 4/12: 1Hp @ 460V AC, 60 Hz
|
| Number of digital inputs |
4
|
| Number of digital outputs |
2
|
| Supporting protocol for DeviceNet |
Yes
|
| Application in industrial area permitted |
Yes
|
| Supporting protocol for DeviceNet Safety |
Yes
|
| Mains frequency |
50/60 Hz
|
| Short circuit protection device performance (SCPD) type |
Type 1
|
| Short circuit rating |
30 kA
|
| Disconnect |
Motor disconnect
|
| Conection type |
Quick disconnects
|
| Utilization category |
Power circuit: AC-3 per IEC
|
| External devices powered by DeviceNet |
50 mA - total 200 mA
|
| Backplane current load |
Output rating- sourced from control circuit: 400 mA
|
| Altitude |
2000 m
|
|---|---|
| Operating temperature |
-20 °C
|
| Storage and transportation temperature |
-25 °C
|
| Humidity |
5…95% (noncondensing)
|
| Protection against shock |
Power circuit: IP2X per IEC
|
| Surge transient |
1 kV L-L, 2 kV L-N (earth)
|
| Radiated emissions |
Class A, group 1, equivalent to C2 emissions
|
| Conducted radio frequency emissions |
Class A
|
| Radio frequency electromagnetic field |
10 V/m
|
| Degree of protection (NEMA) |
4
|
| Pollution degree |
3
|
| Fast transient |
2 kV
|
| Electrostatic discharge |
4 kV contact and 8 kV air
|
| Height, approx |
287.5 mm
|
|---|---|
| Depth, approx |
Motor connection 243 mm (9.57 in) M35 cordset
|
| Wire size |
Power and ground terminal: 1.5...5.3 mm² per IEC (primary terminal)
|
| Width, approx |
351 mm
|
| Number of poles |
3
|
文档
|
User Manual
基本信息
280ES-UM002 |
|
Product Cutsheet
基本信息
-- |
|
Product Profile
基本信息
280ES-PC001 |
|
Selection Guide
基本信息
280-SG002 |
|
Technical Data
基本信息
280ES-TD001 |
|
280-um004_-en-p
用户手册
280-UM004 |
| 基本信息 | 出版 |
|---|---|
| User Manual | 280ES-UM002 |
| Product Cutsheet | -- |
| Product Profile | 280ES-PC001 |
| Selection Guide | 280-SG002 |
| Technical Data | 280ES-TD001 |
| 用户手册 | 出版 |
| 280-um004_-en-p | 280-UM004 |
配件
替代产品
技术说明
| 技术说明 |
|---|
Copyright ©2026 Rockwell Automation, Inc.