| Isolation |
250 V continuous between outputs
|
|---|
| Suitable for safety functions |
False
|
|---|---|
| Digital inputs configurable |
False
|
| Digital outputs configurable |
False
|
| Voltage type of supply voltage |
DC
|
| Type of voltage (input voltage) |
DC
|
| Type of digital output |
Relay
|
| Type of electric connection |
Screw connection
|
| Bounce time, mean |
1.2 µs
|
| Total backplane power |
4.4 W
|
| Thermal dissipation |
15.35 btu/h
|
| Current draw |
150mA @ 5.1V, 150mA @ 24V
|
| Expected contact life |
300 kHz, resistive, 100 kHz, inductive
|
| Module keying |
Electronic, software configurable
|
| Outputs |
16 N.O. individually isolated
|
| Scheduled outputs |
Synchronization within 16.7 s max, reference to the coordinated system time
|
| Power dissipation, max |
4.5 W @ 60 °C (140 °F)
|
| Isolation voltage |
250V (continuous), basic insulation type, outputs-to-backplane, and output-to-output
|
| Wire category |
Wire category: 1
|
| Fusing |
Not protected. A fused IFM can be used to help protect outputs. See publication 1492-TD008. However, the ControlLogix, system has been agency certified using only the ControlLogix RTBs, that is, 1756-TBCH, 1756-TBNH, 1756-TBSH, and, 1756-TBS6H. Any applic
|
| Redundancy |
False
|
| Short-circuit protection, outputs available |
False
|
| Pilot duty |
C300, R150
|
| Initial contact resistance, max |
100 mΩ @ 6V @ 1A
|
| Switching frequency, max |
1 ops/3 s (0.3 Hz at rated load)
|
| States in fault mode per point |
Hold last state, On or Off (Off is default)
|
| States in program mode per point |
Hold last state, On or Off (Off is default)
|
| Slot width |
1
|
|---|---|
| RTB keying |
User-defined mechanical
|
| Shock |
Operating: 30 G, Non operating: 50 G
|
| Vibration |
2 G @ 10...500 Hz
|
| Surrounding air temperature, max |
60 °C
|
|---|---|
| North American temperature code |
T4A
|
| Emissions |
IEC 61000-6-4
|
| ESD immunity |
6 kV contact discharges, 8 kV air discharges
|
| Relative humidity |
5...95% noncondensing
|
| Conducted RF immunity |
10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
|
| EFT/B immunity |
±4kV @ 5kHz on signal ports
|
| Operating temperature |
0 to 60 °C
|
| Surge transient immunity |
±1 kV line-line (DM) and ±2 kV line-earth (CM) on signal ports
|
| Radiated RF immunity |
10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz
|
| Nonoperating temperature |
-40 °C
|
| Oscillatory surge withstand |
IEEE C37.90.1: 3kV
|
| Off-state leakage current per point, max |
1.5 mA
|
|---|---|
| Load current per point, min |
10 mA
|
| Output delay time |
OFF to ON: 10 ms maximum, ON to OFF: 10 ms maximum
|
| Operating voltage |
5...125V DC @ 10...240V AC
|
|---|
| Enclosure type |
None (open-style)
|
|---|
| 图纸 | |
|---|---|
| 3-Dimensional STEP model (STP) | Download (ZIP) |
| Product Drawing | Drawing (DWG) |
| Product Drawing | Drawing (DXF) |
| 图纸 |
|---|
| 3-Dimensional STEP model (STP) Download (ZIP) |
| Product Drawing Drawing (DWG) |
| Product Drawing Drawing (DXF) |
登录您的罗克韦尔自动化帐户以查看和下载技术图纸.
登录
| 类型 | 资源 | 出版 |
|---|---|---|
| General | Technical Detail | -- |
| General | Product Cutsheet | -- |
| General | Product Profile | -- |
| General | Selection Guide | 1756-SG001 |
| Technical Data | 1756-td002_-en-e | 1756-TD002 |
提供下载
- Firmware for 1756-OW16I v3.003
- EDS files for 1756-OW16I (multi)
- EDS files for ControlLogix Family (multi)
- AOP - Add On Profiles for 1756 Discrete I/O v40.12.22
- Safety
- CE
- Australian RCM
- American Bureau of Shippin
- UL Listed Hazardous
This product was certified with the above certifications as of 2025-09-10. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.
技术规格
| Isolation |
250 V continuous between outputs
|
|---|
| Suitable for safety functions |
False
|
|---|---|
| Digital inputs configurable |
False
|
| Digital outputs configurable |
False
|
| Voltage type of supply voltage |
DC
|
| Type of voltage (input voltage) |
DC
|
| Type of digital output |
Relay
|
| Type of electric connection |
Screw connection
|
| Bounce time, mean |
1.2 µs
|
| Total backplane power |
4.4 W
|
| Thermal dissipation |
15.35 btu/h
|
| Current draw |
150mA @ 5.1V, 150mA @ 24V
|
| Expected contact life |
300 kHz, resistive, 100 kHz, inductive
|
| Module keying |
Electronic, software configurable
|
| Outputs |
16 N.O. individually isolated
|
| Scheduled outputs |
Synchronization within 16.7 s max, reference to the coordinated system time
|
| Power dissipation, max |
4.5 W @ 60 °C (140 °F)
|
| Isolation voltage |
250V (continuous), basic insulation type, outputs-to-backplane, and output-to-output
|
| Wire category |
Wire category: 1
|
| Fusing |
Not protected. A fused IFM can be used to help protect outputs. See publication 1492-TD008. However, the ControlLogix, system has been agency certified using only the ControlLogix RTBs, that is, 1756-TBCH, 1756-TBNH, 1756-TBSH, and, 1756-TBS6H. Any applic
|
| Redundancy |
False
|
| Short-circuit protection, outputs available |
False
|
| Pilot duty |
C300, R150
|
| Initial contact resistance, max |
100 mΩ @ 6V @ 1A
|
| Switching frequency, max |
1 ops/3 s (0.3 Hz at rated load)
|
| States in fault mode per point |
Hold last state, On or Off (Off is default)
|
| States in program mode per point |
Hold last state, On or Off (Off is default)
|
| Slot width |
1
|
|---|---|
| RTB keying |
User-defined mechanical
|
| Shock |
Operating: 30 G, Non operating: 50 G
|
| Vibration |
2 G @ 10...500 Hz
|
| Surrounding air temperature, max |
60 °C
|
|---|---|
| North American temperature code |
T4A
|
| Emissions |
IEC 61000-6-4
|
| ESD immunity |
6 kV contact discharges, 8 kV air discharges
|
| Relative humidity |
5...95% noncondensing
|
| Conducted RF immunity |
10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
|
| EFT/B immunity |
±4kV @ 5kHz on signal ports
|
| Operating temperature |
0 to 60 °C
|
| Surge transient immunity |
±1 kV line-line (DM) and ±2 kV line-earth (CM) on signal ports
|
| Radiated RF immunity |
10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz
|
| Nonoperating temperature |
-40 °C
|
| Oscillatory surge withstand |
IEEE C37.90.1: 3kV
|
| Off-state leakage current per point, max |
1.5 mA
|
|---|---|
| Load current per point, min |
10 mA
|
| Output delay time |
OFF to ON: 10 ms maximum, ON to OFF: 10 ms maximum
|
| Operating voltage |
5...125V DC @ 10...240V AC
|
|---|
| Enclosure type |
None (open-style)
|
|---|
图纸
| 图纸 | |
|---|---|
| 3-Dimensional STEP model (STP) | Download (ZIP) |
| Product Drawing | Drawing (DWG) |
| Product Drawing | Drawing (DXF) |
| 图纸 |
|---|
| 3-Dimensional STEP model (STP) Download (ZIP) |
| Product Drawing Drawing (DWG) |
| Product Drawing Drawing (DXF) |
登录您的罗克韦尔自动化帐户以查看和下载技术图纸.
登录
文档
|
Technical Detail
General
-- |
|
Product Cutsheet
General
-- |
|
Product Profile
General
-- |
|
Selection Guide
General
1756-SG001 |
|
1756-td002_-en-e
Technical Data
1756-TD002 |
| 类型 | 资源 | 出版 |
|---|---|---|
| General | Technical Detail | -- |
| General | Product Cutsheet | -- |
| General | Product Profile | -- |
| General | Selection Guide | 1756-SG001 |
| Technical Data | 1756-td002_-en-e | 1756-TD002 |
下载
提供下载
- Firmware for 1756-OW16I v3.003
- EDS files for 1756-OW16I (multi)
- EDS files for ControlLogix Family (multi)
- AOP - Add On Profiles for 1756 Discrete I/O v40.12.22
认证
- Safety
- CE
- Australian RCM
- American Bureau of Shippin
- UL Listed Hazardous
This product was certified with the above certifications as of 2025-09-10. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.
替代产品
技术说明
Loading
Copyright ©2025 Rockwell Automation, Inc.