| Display |
Module Health, In Calibration,Mode
|
|---|---|
| Input Signal |
+/- 10V, 0-10.5V, 0-5.25V.,0-21mA
|
| Isolation |
None between channels (Single,Ended)
|
| Output Signal |
+/- 10.4V, 0-21mA
|
| Special Features |
Sub-ms channel scans,Synchronized sAling across,multiple modules
|
| Input, current |
Yes
|
|---|---|
| Input, voltage |
Yes
|
| Input, resistor |
No
|
| Input, resistance thermometer |
No
|
| Input, thermocouple |
No
|
| Input signal, configurable |
Yes
|
| Output, current |
No
|
| Output, voltage |
No
|
| Output signal configurable |
No
|
| Analogue inputs configurable |
Yes
|
| Analogue outputs configurable |
No
|
| Type of electric connection |
Screw-/spring clA connection
|
| Output range |
±10V, 0…20 mA
|
| Terminal block torque specifications |
1756-TBCH: 0.5 Nm (4.4 in-lb)
|
| Input conversion method |
Successive approximation
|
| Module keying |
Electronic, software configurable
|
| Offset drift |
50 µV/°C, 1 µV/°C
|
| Output conversion method |
R-Ladder DAC, monotonicity with no missing codes
|
| Drive capability |
Voltage: >2000 Ω, Current: 0...750 Ω
|
| Input range |
±10V @ 0...10V, 0...5V @ 0...20mA
|
| Data format |
Integer mode (left justified, 2 s complement) IEEE 32-bit floating point
|
| Wire category |
2 - on signal ports
|
| Overvoltage protection |
Voltage: 30V DC, input, Current: 8V AC/DC, input, Output: 24V DC
|
| Module error |
Input: 0.2% of range, Voltage: 0.2% of range, output, Current: 0.3% of range, output
|
| Gain drift with temperature |
Voltage: 25 ppm/°C maximum, input, Current: 35 ppm/°C maximum, input, Voltage: 25 ppm/°C maximum, output, Current: 50 ppm/°C maximum, output
|
| Voltage and current ratings |
Backplane: 375mA @ 5.1V DC, 100mA @ 24V DC, Analog inputs: -10...+10V @ 4...20mA, Analog outputs: -10...+10V @ 4...20mA
|
| Module scan time |
300 µs minimum
|
| Thermal dissipation |
Voltage: 14.66 BTU/hr, Current: 16.02 BTU/hr
|
| Current draw |
375mA @ 5.1V, 100mA @ 24V
|
| Power dissipation |
Voltage: 4.3 W, Current: 4.7 W
|
| Resolution |
Input: Approx 14 bit across ±10.5V DC (21V total), ±10.5V range: 1.3 mV/bit, 14 bit effective, 0...10.5V range: 1.3 mV/bit, 13 bit effective, 0...5.25V range: 1.3 mV/bit, 12 bit effective, Approx 12 bit across 21mA @ 0...21mA range: 5.25 µA/bit, Output
|
| Wire size |
Single wire connection (1756-TBCH): 0.33...2.1 mm² (22...14 AWG) solid or stranded shielded copper wire, rated at 105 °C (221 °F) or greater, 1.2 mm (3/64 in.) insulation maximum, Single wire connection (1756-TBS6H): 0.33...2.1 mm² (22...14 AWG) solid or
|
| Calibrated accuracy |
Input: 0.05% of range immediately after calibration Better than 0.1% of range within calibration interval @ 25 °C (77 °F), Output: 0.05% of range immediately after calibration Better than 0.1% of range within calibration interval @ 25 °C (77 °F)
|
| Open circuit detection time |
Input: Positive full-scale reading within 1 s, Output: Current output only (output must be set to >0.1 mA)
|
| Suitable for safety functions |
No
|
| Update period for all channels (RPI), min |
1 ms
|
| Number, output |
2 high-speed voltage or current
|
| Number, input |
4 high-speed, subms, differential
|
| Short circuit protection |
Electronically current limited to 21 mA or less
|
| Output settling time |
<2 ms to 95% of final value with resistive loads
|
| Surrounding air temperature, max |
60 °C
|
|---|---|
| North American temperature code |
T4A
|
| Power consumption |
4.3 W
|
| Emissions |
IEC 61000-6-4
|
| ESD immunity |
6 kV contact discharges, 8 kV air discharges
|
| EFT/B immunity |
±2kV @ 5kHz on shielded signal ports
|
| Relative humidity |
5...95% noncondensing
|
| Conducted RF immunity |
10V rms with 1 kHz sine wave 80% AM from 150 kHz...80 MHz on shielded signal ports
|
| Surge transient immunity |
±2 kV line-earth (CM) on shielded signal ports
|
| Operating temperature |
0 °C <60 °C (32 °F <140 °F)
|
| Radiated RF immunity |
10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2700...6
|
| Nonoperating temperature |
-40 °C
|
| RTB keying |
User-defined mechanical
|
|---|---|
| Vibration |
2 G @ 10...500 Hz
|
| Shock |
Operating: 30 G, Non operating: 50 G
|
| Slot width |
1
|
| Calibration interval |
Input: 12 mo, Output: 12 mo
|
|---|---|
| ATEX temperature code |
T4
|
| IECEx temperature code |
T4
|
| Repeatability |
±1 least significant bit (LSB)
|
|---|
| Input impedance |
Voltage: >1 MΩ, Current: 249 Ω
|
|---|
| Isolation voltage |
250V (continuous), Reinforced insulation type, inputs and outputs to backplane, No isolation between individual inputs or outputs
|
|---|
| Enclosure type rating |
None (open-style)
|
|---|
| 基本信息 | 出版 |
|---|---|
| Selection Guide | 1756-SG001 |
| Technical Detail | -- |
| Product Profile | -- |
| Product Cutsheet | -- |
| 技术数据 | 出版 |
|---|---|
| 1756-td002_-en-e | 1756-TD002 |
提供下载
- Firmware for 1756-IF4FXOF2F Analog I/O
- EDS files for 1756-IF4FXOF2F (multi)
- EDS files for ControlLogix Family (multi)
- AOP - Add On Profiles for 1756 Analog I/O v40.12.23
- AOP - Add On Profiles for 1756-IF8, IF16, OF4, OF8 v40.13.06
- AOP - Add On Profiles for 1756 Analog1 v40.14.70
- China CCC
- CE
- ATEX
- IECEx Scheme
- Australian RCM
- MOROCCO DOC
- Eurasion Economic Community
截至 2026-01-15，此产品已获得上述多项认证。此日期前后销售的产品，所获认证可能有所不同。请查阅产品标签，确认具体产品所持有的相关认证。
技术规格
| Display |
Module Health, In Calibration,Mode
|
|---|---|
| Input Signal |
+/- 10V, 0-10.5V, 0-5.25V.,0-21mA
|
| Isolation |
None between channels (Single,Ended)
|
| Output Signal |
+/- 10.4V, 0-21mA
|
| Special Features |
Sub-ms channel scans,Synchronized sAling across,multiple modules
|
| Input, current |
Yes
|
|---|---|
| Input, voltage |
Yes
|
| Input, resistor |
No
|
| Input, resistance thermometer |
No
|
| Input, thermocouple |
No
|
| Input signal, configurable |
Yes
|
| Output, current |
No
|
| Output, voltage |
No
|
| Output signal configurable |
No
|
| Analogue inputs configurable |
Yes
|
| Analogue outputs configurable |
No
|
| Type of electric connection |
Screw-/spring clA connection
|
| Output range |
±10V, 0…20 mA
|
| Terminal block torque specifications |
1756-TBCH: 0.5 Nm (4.4 in-lb)
|
| Input conversion method |
Successive approximation
|
| Module keying |
Electronic, software configurable
|
| Offset drift |
50 µV/°C, 1 µV/°C
|
| Output conversion method |
R-Ladder DAC, monotonicity with no missing codes
|
| Drive capability |
Voltage: >2000 Ω, Current: 0...750 Ω
|
| Input range |
±10V @ 0...10V, 0...5V @ 0...20mA
|
| Data format |
Integer mode (left justified, 2 s complement) IEEE 32-bit floating point
|
| Wire category |
2 - on signal ports
|
| Overvoltage protection |
Voltage: 30V DC, input, Current: 8V AC/DC, input, Output: 24V DC
|
| Module error |
Input: 0.2% of range, Voltage: 0.2% of range, output, Current: 0.3% of range, output
|
| Gain drift with temperature |
Voltage: 25 ppm/°C maximum, input, Current: 35 ppm/°C maximum, input, Voltage: 25 ppm/°C maximum, output, Current: 50 ppm/°C maximum, output
|
| Voltage and current ratings |
Backplane: 375mA @ 5.1V DC, 100mA @ 24V DC, Analog inputs: -10...+10V @ 4...20mA, Analog outputs: -10...+10V @ 4...20mA
|
| Module scan time |
300 µs minimum
|
| Thermal dissipation |
Voltage: 14.66 BTU/hr, Current: 16.02 BTU/hr
|
| Current draw |
375mA @ 5.1V, 100mA @ 24V
|
| Power dissipation |
Voltage: 4.3 W, Current: 4.7 W
|
| Resolution |
Input: Approx 14 bit across ±10.5V DC (21V total), ±10.5V range: 1.3 mV/bit, 14 bit effective, 0...10.5V range: 1.3 mV/bit, 13 bit effective, 0...5.25V range: 1.3 mV/bit, 12 bit effective, Approx 12 bit across 21mA @ 0...21mA range: 5.25 µA/bit, Output
|
| Wire size |
Single wire connection (1756-TBCH): 0.33...2.1 mm² (22...14 AWG) solid or stranded shielded copper wire, rated at 105 °C (221 °F) or greater, 1.2 mm (3/64 in.) insulation maximum, Single wire connection (1756-TBS6H): 0.33...2.1 mm² (22...14 AWG) solid or
|
| Calibrated accuracy |
Input: 0.05% of range immediately after calibration Better than 0.1% of range within calibration interval @ 25 °C (77 °F), Output: 0.05% of range immediately after calibration Better than 0.1% of range within calibration interval @ 25 °C (77 °F)
|
| Open circuit detection time |
Input: Positive full-scale reading within 1 s, Output: Current output only (output must be set to >0.1 mA)
|
| Suitable for safety functions |
No
|
| Update period for all channels (RPI), min |
1 ms
|
| Number, output |
2 high-speed voltage or current
|
| Number, input |
4 high-speed, subms, differential
|
| Short circuit protection |
Electronically current limited to 21 mA or less
|
| Output settling time |
<2 ms to 95% of final value with resistive loads
|
| Surrounding air temperature, max |
60 °C
|
|---|---|
| North American temperature code |
T4A
|
| Power consumption |
4.3 W
|
| Emissions |
IEC 61000-6-4
|
| ESD immunity |
6 kV contact discharges, 8 kV air discharges
|
| EFT/B immunity |
±2kV @ 5kHz on shielded signal ports
|
| Relative humidity |
5...95% noncondensing
|
| Conducted RF immunity |
10V rms with 1 kHz sine wave 80% AM from 150 kHz...80 MHz on shielded signal ports
|
| Surge transient immunity |
±2 kV line-earth (CM) on shielded signal ports
|
| Operating temperature |
0 °C <60 °C (32 °F <140 °F)
|
| Radiated RF immunity |
10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2700...6
|
| Nonoperating temperature |
-40 °C
|
| RTB keying |
User-defined mechanical
|
|---|---|
| Vibration |
2 G @ 10...500 Hz
|
| Shock |
Operating: 30 G, Non operating: 50 G
|
| Slot width |
1
|
| Calibration interval |
Input: 12 mo, Output: 12 mo
|
|---|---|
| ATEX temperature code |
T4
|
| IECEx temperature code |
T4
|
| Repeatability |
±1 least significant bit (LSB)
|
|---|
| Input impedance |
Voltage: >1 MΩ, Current: 249 Ω
|
|---|
| Isolation voltage |
250V (continuous), Reinforced insulation type, inputs and outputs to backplane, No isolation between individual inputs or outputs
|
|---|
| Enclosure type rating |
None (open-style)
|
|---|
图纸
文档
|
Selection Guide
基本信息
1756-SG001 |
|
Technical Detail
基本信息
-- |
|
Product Profile
基本信息
-- |
|
Product Cutsheet
基本信息
-- |
|
1756-td002_-en-e
技术数据
1756-TD002 |
| 基本信息 | 出版 |
|---|---|
| Selection Guide | 1756-SG001 |
| Technical Detail | -- |
| Product Profile | -- |
| Product Cutsheet | -- |
| 技术数据 | 出版 |
| 1756-td002_-en-e | 1756-TD002 |
下载
提供下载
- Firmware for 1756-IF4FXOF2F Analog I/O
- EDS files for 1756-IF4FXOF2F (multi)
- EDS files for ControlLogix Family (multi)
- AOP - Add On Profiles for 1756 Analog I/O v40.12.23
- AOP - Add On Profiles for 1756-IF8, IF16, OF4, OF8 v40.13.06
- AOP - Add On Profiles for 1756 Analog1 v40.14.70
认证
- China CCC
- CE
- ATEX
- IECEx Scheme
- Australian RCM
- MOROCCO DOC
- Eurasion Economic Community
截至 2026-01-15，此产品已获得上述多项认证。此日期前后销售的产品，所获认证可能有所不同。请查阅产品标签，确认具体产品所持有的相关认证。
替代产品
技术说明
Loading
Copyright ©2026 Rockwell Automation, Inc.