| Suitable for safety functions |
No
|
|---|---|
| Digital inputs configurable |
Yes
|
| Digital outputs configurable |
No
|
| Voltage type of supply voltage |
DC
|
| Type of electric connection |
Screw connection
|
| Total backplane power |
1.6 W
|
| Thermal dissipation |
19.1 btu/h
|
| Number of counters |
2 counters
|
| Current draw |
300mA @ 5.1V, 3mA @ 24V
|
| Module keying |
Electronic, software configurable
|
| Outputs |
4 (2 points/group)
|
| Power dissipation, max |
5.6 W @ 60 °C(140 °F)
|
| Isolation voltage |
125V (continuous), basic insulation type, input group-to-backplane, 30V (continuous), basic insulation type, input group-to-input group
|
| Wire category |
2 on signal ports, 1 on power ports
|
| Short-circuit protection, outputs available |
No
|
| Inputs per counter |
3 (A, B, Z for gate/reset)
|
| Slot width |
1
|
|---|---|
| RTB keying |
User-defined mechanical
|
| Shock |
Operating: 30 G, Non operating: 50 G
|
| Vibration |
2 G @ 10...500 Hz
|
| Surrounding air temperature, max |
60 °C
|
|---|---|
| North American temperature code |
T4
|
| Emissions |
IEC 61000-6-4
|
| ESD immunity |
6 kV contact discharges, 8 kV air discharges
|
| Relative humidity |
5...95% noncondensing
|
| Conducted RF immunity |
10V rms with 1 kHz sine wave 80% AM from 150 kHz...80 MHz on shielded signal ports
|
| EFT/B immunity |
±4kV @ 5kHz on power ports, ±4kV @ 5kHz on signal ports
|
| Operating temperature |
0 to 60 °C
|
| Surge transient immunity |
±1 kV line-line (DM) and ±2 kV line-earth (CM) on power ports, ±1 kV line-line (DM) and ±2 kV line-earth (CM) on signal ports, ±2 kV line-earth (CM) on shielded ports
|
| Radiated RF immunity |
10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz
|
| Nonoperating temperature |
-40 °C
|
| Counting frequency, max |
1000 khz
|
|---|---|
| Count range |
0...16, 777, 214
|
| Operating voltage |
5V ops: 4.5...5.5V DC @ 12/24V ops: 10...26.4V DC
|
| Input frequency, max |
1 MHz in counter modes (A input), 500 kHz in rate measurement mode (A input), 250 kHz in encoder mode (A/B inputs, X1 or X4), 70 Hz with filter enabled
|
| Input current, min |
4 mA
|
| Input current, nom |
15 mA
|
| On-state voltage drop, max |
0.55 V
|
|---|---|
| Off-state leakage current per point, max |
300 µA
|
| Load current per point, min |
5V ops: 3mA @ 12/24V ops: 40 mA
|
| Short circuit protection |
Electronic (remove overload and toggle On/Off to restore.)
|
| Reverse polarity protection |
Yes (if wired incorrectly, module outputs can be permanently disabled.)
|
| Output control |
Up to two outputs are assigned to each counter channel, each output can have two ‘turn-on’ and ’turn-off’ preset values
|
| Output delay time |
OFF to ON: 20 µs nominal, 50 µs maximum, ON to OFF: 60 µs nominal, 300 µs maximum
|
| Counter, max |
1 mhz
|
| Debounce filter, max |
70 Hz
|
| Rate measurement, max |
500 khz
|
| Encoder, max |
250 khz
|
| Current limit |
<4 A
|
| Surge current per point |
2 A for 10 ms every 1 s @ 60 °C (140 °F)
|
| Output current rating, per point |
20mA @ 4.5...5.5V DC, 1.0A @ 10...31.2V DC
|
| IEC temperature code |
T4
|
|---|
| Enclosure type |
None (open-style)
|
|---|
| 基本信息 | 出版 |
|---|---|
| Technical Detail | -- |
| Product Cutsheet | -- |
| Product Profile | -- |
| Selection Guide | 1756-SG001 |
| 技术数据 | 出版 |
|---|---|
| 1756-td002_-en-e | 1756-TD002 |
提供下载
- EDS files for 1756-HSC (multi)
- EDS files for ControlLogix Family (multi)
- Firmware for 1756-HSC v5.011
- AOP - Add On Profiles for 1756-CFM v40.10.07
- ATEX
- IECEx Scheme
- China CCC
- CE
- Australian RCM
- Korean KC
- UL Listed Hazardous
- UKCA DOC
- Eurasion Economic Community
截至 2026-02-01，此产品已获得上述多项认证。此日期前后销售的产品，所获认证可能有所不同。请查阅产品标签，确认具体产品所持有的相关认证。
| 技术说明 |
|---|
技术规格
| Suitable for safety functions |
No
|
|---|---|
| Digital inputs configurable |
Yes
|
| Digital outputs configurable |
No
|
| Voltage type of supply voltage |
DC
|
| Type of electric connection |
Screw connection
|
| Total backplane power |
1.6 W
|
| Thermal dissipation |
19.1 btu/h
|
| Number of counters |
2 counters
|
| Current draw |
300mA @ 5.1V, 3mA @ 24V
|
| Module keying |
Electronic, software configurable
|
| Outputs |
4 (2 points/group)
|
| Power dissipation, max |
5.6 W @ 60 °C(140 °F)
|
| Isolation voltage |
125V (continuous), basic insulation type, input group-to-backplane, 30V (continuous), basic insulation type, input group-to-input group
|
| Wire category |
2 on signal ports, 1 on power ports
|
| Short-circuit protection, outputs available |
No
|
| Inputs per counter |
3 (A, B, Z for gate/reset)
|
| Slot width |
1
|
|---|---|
| RTB keying |
User-defined mechanical
|
| Shock |
Operating: 30 G, Non operating: 50 G
|
| Vibration |
2 G @ 10...500 Hz
|
| Surrounding air temperature, max |
60 °C
|
|---|---|
| North American temperature code |
T4
|
| Emissions |
IEC 61000-6-4
|
| ESD immunity |
6 kV contact discharges, 8 kV air discharges
|
| Relative humidity |
5...95% noncondensing
|
| Conducted RF immunity |
10V rms with 1 kHz sine wave 80% AM from 150 kHz...80 MHz on shielded signal ports
|
| EFT/B immunity |
±4kV @ 5kHz on power ports, ±4kV @ 5kHz on signal ports
|
| Operating temperature |
0 to 60 °C
|
| Surge transient immunity |
±1 kV line-line (DM) and ±2 kV line-earth (CM) on power ports, ±1 kV line-line (DM) and ±2 kV line-earth (CM) on signal ports, ±2 kV line-earth (CM) on shielded ports
|
| Radiated RF immunity |
10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz
|
| Nonoperating temperature |
-40 °C
|
| Counting frequency, max |
1000 khz
|
|---|---|
| Count range |
0...16, 777, 214
|
| Operating voltage |
5V ops: 4.5...5.5V DC @ 12/24V ops: 10...26.4V DC
|
| Input frequency, max |
1 MHz in counter modes (A input), 500 kHz in rate measurement mode (A input), 250 kHz in encoder mode (A/B inputs, X1 or X4), 70 Hz with filter enabled
|
| Input current, min |
4 mA
|
| Input current, nom |
15 mA
|
| On-state voltage drop, max |
0.55 V
|
|---|---|
| Off-state leakage current per point, max |
300 µA
|
| Load current per point, min |
5V ops: 3mA @ 12/24V ops: 40 mA
|
| Short circuit protection |
Electronic (remove overload and toggle On/Off to restore.)
|
| Reverse polarity protection |
Yes (if wired incorrectly, module outputs can be permanently disabled.)
|
| Output control |
Up to two outputs are assigned to each counter channel, each output can have two ‘turn-on’ and ’turn-off’ preset values
|
| Output delay time |
OFF to ON: 20 µs nominal, 50 µs maximum, ON to OFF: 60 µs nominal, 300 µs maximum
|
| Counter, max |
1 mhz
|
| Debounce filter, max |
70 Hz
|
| Rate measurement, max |
500 khz
|
| Encoder, max |
250 khz
|
| Current limit |
<4 A
|
| Surge current per point |
2 A for 10 ms every 1 s @ 60 °C (140 °F)
|
| Output current rating, per point |
20mA @ 4.5...5.5V DC, 1.0A @ 10...31.2V DC
|
| IEC temperature code |
T4
|
|---|
| Enclosure type |
None (open-style)
|
|---|
图纸
文档
|
Technical Detail
基本信息
-- |
|
Product Cutsheet
基本信息
-- |
|
Product Profile
基本信息
-- |
|
Selection Guide
基本信息
1756-SG001 |
|
1756-td002_-en-e
技术数据
1756-TD002 |
| 基本信息 | 出版 |
|---|---|
| Technical Detail | -- |
| Product Cutsheet | -- |
| Product Profile | -- |
| Selection Guide | 1756-SG001 |
| 技术数据 | 出版 |
| 1756-td002_-en-e | 1756-TD002 |
下载
提供下载
- EDS files for 1756-HSC (multi)
- EDS files for ControlLogix Family (multi)
- Firmware for 1756-HSC v5.011
- AOP - Add On Profiles for 1756-CFM v40.10.07
认证
- ATEX
- IECEx Scheme
- China CCC
- CE
- Australian RCM
- Korean KC
- UL Listed Hazardous
- UKCA DOC
- Eurasion Economic Community
截至 2026-02-01，此产品已获得上述多项认证。此日期前后销售的产品，所获认证可能有所不同。请查阅产品标签，确认具体产品所持有的相关认证。
替代产品
技术说明
| 技术说明 |
|---|
Copyright ©2026 Rockwell Automation, Inc.