| Accuracy |
0.20%
|
|---|---|
| Alarm |
Yes
|
| Communications |
DeviceNet and EtherNet/IP
|
| Frequency Rating |
40-75Hz
|
| Interface |
Webpage
|
| Metering Voltage |
600VLL AC
|
| Output |
4 Digital Relays
|
| Vibration |
2 G
|
|---|---|
| Shock |
50 G, nonoperating
|
| Dielectric withstand |
UL61010, EN61010
|
| Storage temperature |
-40 to 85 °C
|
| Operating temperature |
-20 to 70 °C
|
| Altitude |
2000 m, max
|
| Installation location |
Indoor use only
|
| Humidity |
5...95% noncondensing
|
| Height |
132 mm
|
|---|---|
| Width |
185 mm
|
| Control power and ground wiring terminals |
• 120...240V AC @ 50/60Hz, or 120...240V DC • 24V DC
|
| Virtual wiring correction indicator |
Indicates that a virtual wiring correction command has been applied to resolve wiring errors without rewiring
|
| Voltage sensing wiring terminals |
• Direct connect to up to 690V AC 3-phase line to line • Maximum nominal line to ground voltage 690 • Use potential transformers (PTs) for higher voltages • Neutral voltage and ground voltage connections
|
| Device status indicators |
• Device status - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: Power monitor has not been configured - GREEN: Power monitor is running - Flashing RED: Power monitor has detected a recoverable minor fault - RED: Power monitor has detected a non-recoverable major fault
|
| Ethernet network port - standard RJ45 jack with status indicators |
Ethernet port hardware is included on all models. these protocols and functions are supported: • EtherNet/IP™ network • HTML web page for configuration and data access ethernet indicators • LNK indicator - Solid GREEN: IP link established - Off: no link established • ACT indicator - Flashing YELLOW: data present on Ethernet port - Off: no data activity present
|
| USB host port |
USB standard A receptacle. Not used in this model.
|
| Power |
•Power status - OFF: no control power - GREEN: control power is present
|
| Current sensing wiring terminals |
Nominal input current 5 A, Use current transformers (CTs) to connect to power system
|
| Configuration lock switch |
When enabled, this switch helps prevent changes in configuration that can affect revenue accuracy.
|
| USB device port |
The USB device port is a USB Mini-B receptacle that accepts standard USB Mini-B plugs, for connection to a host device, such as a notebook computer.
|
| Status input, KYZ output, and control relay wiring terminals |
• Four internally powered (24V DC) status inputs • Status input 2 can be used for demand period synchronization • KYZ DPDT solid-state relay for signaling use • Three DPDT control relays
|
| Network status indicators |
• Network status (Native Ethernet port) - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: No CIP connection - Solid GREEN: CIP connection established - Flashing RED: CIP connection timed out - Solid RED: Duplicate IP address detected
|
| Optional communication port |
DeviceNet and ControlNet networks • Module status - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: Power monitor has not been configured - GREEN: Power monitor is running - Flashing RED: Power monitor has detected a recoverable minor fault - RED: Power monitor has detected a non-recoverable major fault • Network status - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: No CIP connection - Solid GREEN: CIP connection established - Flashing RED: CIP connection timed out - Solid RED: Duplicate address detected
|
| IC rating class |
UL 508, CSA 22.2 @ DC: Q300
|
|---|---|
| Resistive load switching |
10A @ 24V DC, maximum
|
| Load switching |
100mA @ 5V AC, 50/60 Hz, RMS, minimum
|
| Motor load switching |
1/3HP @ 125V AC, 50/60 Hz, RMS, maximum
|
| Make values |
(Inductive load) 30A @ 120V AC, 50/60 Hz, RMS, maximum
|
| Break values |
(Inductive load) 3A @ 120V AC, 50/60 Hz, RMS, maximum
|
| Crest factor |
V-V, V-N, and I, per phase: Yes
|
|---|---|
| Reactive energy (kVARh) |
Yes
|
| Frequency |
Nominal: 60 Hz
|
| Real energy (kWh) |
Yes
|
| Reactive power (kVAR) |
Yes
|
| Real power (kW) |
Yes
|
| Apparent power (kVA) |
Yes
|
| Real power demand (kW) |
Yes
|
| Reactive power demand (kVAR) |
Yes
|
| Apparent power demand (kVA) |
Yes
|
| Demand power factor |
Yes
|
| Projected kW demand |
Yes
|
| Projected kVAR demand |
Yes
|
| Projected kVA demand |
Yes
|
| Voltage unbalance |
Yes
|
| Current unbalance |
Yes
|
| Voltage, L-L and L-N |
Yes
|
| Current per phase and total |
Yes
|
| Symmetrical component analysis |
Yes
|
| True power factor per phase and total |
Yes
|
| Displacement power factor per phase and total |
Yes
|
| Apparent energy (kVAh) |
Yes
|
| Demand, amps |
Yes
|
| Projected amps demand |
Yes
|
| Current consumption |
Yes
|
| Control power |
12VA @ 24V DC
|
|---|---|
| Current sense inputs: I1, I2, I3 |
Accuracy: ±0.1% @ 25°C 50/60 Hz unity power factor
|
| Status inputs |
Yes
|
|---|---|
| Configurable via webpage |
Yes
|
| CIP energy object |
Yes
|
| Security |
Yes
|
| Wiring diagnostics |
Yes
|
| Virtual wiring correction |
Yes
|
| Network time synchronization |
Yes
|
| Network demand synchronization |
Yes
|
| IEEE 1588 precision time protocol |
Yes
|
| Pulse (digital) output (relay and KYZ) |
Yes
|
| Setpoint programming |
Yes
|
| Sag and swell detection |
Yes
|
| Web page |
Yes
|
| K-factor |
Yes
|
| Revenue accuracy |
Yes
|
| Total harmonic distortion (THD) |
Yes
|
| Control power |
12VA @ 24V DC
|
|---|---|
| Current sense inputs: I1, I2, I3 |
Accuracy: ±0.1% @ 25°C 50/60 Hz unity power factor
|
| Power functions |
• ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8
|
|---|---|
| Demand functions |
• ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8
|
| Metering update rates |
One update per line cycle, 1024 sAles per cycle per channel
|
| VG |
Connect to power system earth ground only, This connection is a functional ground.
|
| Energy functions |
• ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8
|
| Description |
PowerMonitor 5000 M5 unit with native ethernet and optional devicenet network communication
|
|---|---|
| Ampere meter |
Yes
|
| Blind power meter |
Yes
|
| Frequency meter |
Yes
|
| Pulse counter |
Yes
|
| Voltmeter |
Yes
|
| Effective power measurement device |
Yes
|
| Depth |
178 mm
|
|---|
| Time of use log |
Yes
|
|---|---|
| Energy log |
Yes
|
| Minimum/maximum log |
Yes
|
| Load factor log |
Yes
|
| Alarm log |
Yes
|
| Data log |
Yes
|
| Event log |
Yes
|
| Setpoint log |
Yes
|
| EtherNet/IP |
Yes
|
|---|---|
| Devicenet |
Yes
|
| 图纸 | |
|---|---|
| 3D STEP Model (STP) | 下载 (ZIP) |
| 2D Drawing (PDF) | 下载 (PDF) |
| 3 DImensional Drawing (PDF) | 下载 (PDF) |
| Product Drawing | Drawing (DXF) |
| 图纸 |
|---|
| 3D STEP Model (STP) 下载 (ZIP) |
| 2D Drawing (PDF) 下载 (PDF) |
| 3 DImensional Drawing (PDF) 下载 (PDF) |
| Product Drawing Drawing (DXF) |
登录您的罗克韦尔自动化帐户以查看和下载技术图纸.
登录
| 类型 | 资源 | 出版 |
|---|---|---|
| User Manual | 1426-um001_-en-p | 1426-UM001 |
| 常规 | PowerMonitor 5000 Product Profile | 1426-PP001 |
| 常规 | PowerMonitor 5000 USB Driver Installation and Configuration Instructions | 1426-IN001 |
| 常规 | Product Cutsheet | -- |
- Australian RCM
- UKCA DOC
This product was certified with the above certifications as of 2025-09-10. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.
技术规格
| Accuracy |
0.20%
|
|---|---|
| Alarm |
Yes
|
| Communications |
DeviceNet and EtherNet/IP
|
| Frequency Rating |
40-75Hz
|
| Interface |
Webpage
|
| Metering Voltage |
600VLL AC
|
| Output |
4 Digital Relays
|
| Vibration |
2 G
|
|---|---|
| Shock |
50 G, nonoperating
|
| Dielectric withstand |
UL61010, EN61010
|
| Storage temperature |
-40 to 85 °C
|
| Operating temperature |
-20 to 70 °C
|
| Altitude |
2000 m, max
|
| Installation location |
Indoor use only
|
| Humidity |
5...95% noncondensing
|
| Height |
132 mm
|
|---|---|
| Width |
185 mm
|
| Control power and ground wiring terminals |
• 120...240V AC @ 50/60Hz, or 120...240V DC • 24V DC
|
| Virtual wiring correction indicator |
Indicates that a virtual wiring correction command has been applied to resolve wiring errors without rewiring
|
| Voltage sensing wiring terminals |
• Direct connect to up to 690V AC 3-phase line to line • Maximum nominal line to ground voltage 690 • Use potential transformers (PTs) for higher voltages • Neutral voltage and ground voltage connections
|
| Device status indicators |
• Device status - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: Power monitor has not been configured - GREEN: Power monitor is running - Flashing RED: Power monitor has detected a recoverable minor fault - RED: Power monitor has detected a non-recoverable major fault
|
| Ethernet network port - standard RJ45 jack with status indicators |
Ethernet port hardware is included on all models. these protocols and functions are supported: • EtherNet/IP™ network • HTML web page for configuration and data access ethernet indicators • LNK indicator - Solid GREEN: IP link established - Off: no link established • ACT indicator - Flashing YELLOW: data present on Ethernet port - Off: no data activity present
|
| USB host port |
USB standard A receptacle. Not used in this model.
|
| Power |
•Power status - OFF: no control power - GREEN: control power is present
|
| Current sensing wiring terminals |
Nominal input current 5 A, Use current transformers (CTs) to connect to power system
|
| Configuration lock switch |
When enabled, this switch helps prevent changes in configuration that can affect revenue accuracy.
|
| USB device port |
The USB device port is a USB Mini-B receptacle that accepts standard USB Mini-B plugs, for connection to a host device, such as a notebook computer.
|
| Status input, KYZ output, and control relay wiring terminals |
• Four internally powered (24V DC) status inputs • Status input 2 can be used for demand period synchronization • KYZ DPDT solid-state relay for signaling use • Three DPDT control relays
|
| Network status indicators |
• Network status (Native Ethernet port) - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: No CIP connection - Solid GREEN: CIP connection established - Flashing RED: CIP connection timed out - Solid RED: Duplicate IP address detected
|
| Optional communication port |
DeviceNet and ControlNet networks • Module status - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: Power monitor has not been configured - GREEN: Power monitor is running - Flashing RED: Power monitor has detected a recoverable minor fault - RED: Power monitor has detected a non-recoverable major fault • Network status - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: No CIP connection - Solid GREEN: CIP connection established - Flashing RED: CIP connection timed out - Solid RED: Duplicate address detected
|
| IC rating class |
UL 508, CSA 22.2 @ DC: Q300
|
|---|---|
| Resistive load switching |
10A @ 24V DC, maximum
|
| Load switching |
100mA @ 5V AC, 50/60 Hz, RMS, minimum
|
| Motor load switching |
1/3HP @ 125V AC, 50/60 Hz, RMS, maximum
|
| Make values |
(Inductive load) 30A @ 120V AC, 50/60 Hz, RMS, maximum
|
| Break values |
(Inductive load) 3A @ 120V AC, 50/60 Hz, RMS, maximum
|
| Crest factor |
V-V, V-N, and I, per phase: Yes
|
|---|---|
| Reactive energy (kVARh) |
Yes
|
| Frequency |
Nominal: 60 Hz
|
| Real energy (kWh) |
Yes
|
| Reactive power (kVAR) |
Yes
|
| Real power (kW) |
Yes
|
| Apparent power (kVA) |
Yes
|
| Real power demand (kW) |
Yes
|
| Reactive power demand (kVAR) |
Yes
|
| Apparent power demand (kVA) |
Yes
|
| Demand power factor |
Yes
|
| Projected kW demand |
Yes
|
| Projected kVAR demand |
Yes
|
| Projected kVA demand |
Yes
|
| Voltage unbalance |
Yes
|
| Current unbalance |
Yes
|
| Voltage, L-L and L-N |
Yes
|
| Current per phase and total |
Yes
|
| Symmetrical component analysis |
Yes
|
| True power factor per phase and total |
Yes
|
| Displacement power factor per phase and total |
Yes
|
| Apparent energy (kVAh) |
Yes
|
| Demand, amps |
Yes
|
| Projected amps demand |
Yes
|
| Current consumption |
Yes
|
| Control power |
12VA @ 24V DC
|
|---|---|
| Current sense inputs: I1, I2, I3 |
Accuracy: ±0.1% @ 25°C 50/60 Hz unity power factor
|
| Status inputs |
Yes
|
|---|---|
| Configurable via webpage |
Yes
|
| CIP energy object |
Yes
|
| Security |
Yes
|
| Wiring diagnostics |
Yes
|
| Virtual wiring correction |
Yes
|
| Network time synchronization |
Yes
|
| Network demand synchronization |
Yes
|
| IEEE 1588 precision time protocol |
Yes
|
| Pulse (digital) output (relay and KYZ) |
Yes
|
| Setpoint programming |
Yes
|
| Sag and swell detection |
Yes
|
| Web page |
Yes
|
| K-factor |
Yes
|
| Revenue accuracy |
Yes
|
| Total harmonic distortion (THD) |
Yes
|
| Control power |
12VA @ 24V DC
|
|---|---|
| Current sense inputs: I1, I2, I3 |
Accuracy: ±0.1% @ 25°C 50/60 Hz unity power factor
|
| Power functions |
• ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8
|
|---|---|
| Demand functions |
• ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8
|
| Metering update rates |
One update per line cycle, 1024 sAles per cycle per channel
|
| VG |
Connect to power system earth ground only, This connection is a functional ground.
|
| Energy functions |
• ANSI C12.20 -2010 class 0.2 clause 5.5.4 • EN 62053-22 -2003 class 0.2 accuracy clause 8
|
| Description |
PowerMonitor 5000 M5 unit with native ethernet and optional devicenet network communication
|
|---|---|
| Ampere meter |
Yes
|
| Blind power meter |
Yes
|
| Frequency meter |
Yes
|
| Pulse counter |
Yes
|
| Voltmeter |
Yes
|
| Effective power measurement device |
Yes
|
| Depth |
178 mm
|
|---|
| Time of use log |
Yes
|
|---|---|
| Energy log |
Yes
|
| Minimum/maximum log |
Yes
|
| Load factor log |
Yes
|
| Alarm log |
Yes
|
| Data log |
Yes
|
| Event log |
Yes
|
| Setpoint log |
Yes
|
| EtherNet/IP |
Yes
|
|---|---|
| Devicenet |
Yes
|
图纸
| 图纸 | |
|---|---|
| 3D STEP Model (STP) | 下载 (ZIP) |
| 2D Drawing (PDF) | 下载 (PDF) |
| 3 DImensional Drawing (PDF) | 下载 (PDF) |
| Product Drawing | Drawing (DXF) |
| 图纸 |
|---|
| 3D STEP Model (STP) 下载 (ZIP) |
| 2D Drawing (PDF) 下载 (PDF) |
| 3 DImensional Drawing (PDF) 下载 (PDF) |
| Product Drawing Drawing (DXF) |
登录您的罗克韦尔自动化帐户以查看和下载技术图纸.
登录
文档
|
1426-um001_-en-p
User Manual
1426-UM001 |
|
PowerMonitor 5000 Product Profile
常规
1426-PP001 |
|
PowerMonitor 5000 USB Driver Installation and Configuration Instructions
常规
1426-IN001 |
|
Product Cutsheet
常规
-- |
| 类型 | 资源 | 出版 |
|---|---|---|
| User Manual | 1426-um001_-en-p | 1426-UM001 |
| 常规 | PowerMonitor 5000 Product Profile | 1426-PP001 |
| 常规 | PowerMonitor 5000 USB Driver Installation and Configuration Instructions | 1426-IN001 |
| 常规 | Product Cutsheet | -- |
认证
- Australian RCM
- UKCA DOC
This product was certified with the above certifications as of 2025-09-10. Products sold before or after this date might carry different certifications. Please review the product label to check for the certifications your specific product carries.
配件
技术说明
Loading
Copyright ©2025 Rockwell Automation, Inc.